PC2-LIMBO

CompactPCI® PlusIO CPU Card • Intel® Atom™ E6xx Series Processor

The PC2-LIMBO is a low power 4HP/3U CompactPCI® CPU board, equipped with an Intel® Atom™ E6xx series 1.6GHz processor, available on request for the industrial operating temperature range. The PC2-LIMBO front panel is provided with two Gigabit Ethernet jacks, two USB receptacles, and a DVI connector for attachment of a high resolution digital display.
The PC2-LIMBO is equipped with up to 2GB soldered RAM for rugged applications. An on-board CFast™ host connector is provided for attachment of a 3Gbps SATA SSD module. In addition, a microSD card holder can accommodate a low cost industrial microSDHC Flash card. Further more, several SATA based low mass storage expansion modules are available as an option. The PC2-LIMBO is equipped wit a set of local expansion interface connectors, which can be optionally used to attach a mezzanine side board. A variety of expansion cards is available, e.g. providing legacy I/O and additional PCI Express based I/O circuitry such as SATA and Gigabit Ethernet, or a secondary video output. Most mezzanine side cards can accommodate in addition a 2.5-inch drive.
Typically, the PC2-LIMBO and the related side card would come as a readily assembled 8HP unit. As an alternate, Flash based mezzanine storage modules are available that fit on the PC2-LIMBO while maintaining the 4HP profile. The C47-MSATA module e.g. accommodates two mSATA SSDs and can be operated in RAID mode. The C42-SATA module is provided with a 1.8-Inch Micro SATA SSD up to 800GB.

Downloads & Ressources

Firmware

  • ZIPFirmware Update
  • TXT
    Release Notes

    ================================================
    Release Notes for Phoenix BIOS on EKF PC2-LIMBO
    ================================================

    This file describes changes, extensions and bug fixes made in Phoenix BIOS
    for EKF PC2-LIMBO. For any further questions contact EKF at:
    Email : support@ekf.de
    Internet : www.ekf.com

    ========================================================================================

    2017-02-01: BIOS release, Build #094 production

    – Added Setup option to execute a fixed delay at the early beginning of POST
    Setup (F2): Advanced -> Boot Configuration -> Execute Delay after Reset
    Available options are: Disabled (no delay), 100ms (Default), 250ms, 500ms, 1s, 4s, 12s or 30s
    If enabled, it allows certain devices to finish its internal initialization before
    POST has access to these devices. The delay is indicated by a red blinking LED GP
    in front panel of PC2-LIMBO.

    – Added Setup option to execute an additional reset on CompactPCI bus
    Setup (F2): Advanced -> Boot Configuration -> Additional Reset on cPCI Bus
    Available options are: Disabled (Default), Enabled
    If enabled, an additional bus reset is executed on CompactPCI (Classic and PlusIO)
    during early board initialization. This possibly solves power-up problems of certain
    PCI devices. Note that this reset increased boottime by approximately one second
    to allow PCI devices to reinitialize itself (PCI specification Trhfa parameter).

    ========================================================================================

    2015-04-24: BIOS release, Build #092 production

    – Added support for SPI of type EON EN25QH16

    – Added support for processor-internal Thermal Monitor 1
    Thermal Monitor 1 can be controlled with this setup item:
    Setup [F2]: Advanced -> Processor Configuration -> Processor Power and Thermal Management -> Thermal Monitor TM1
    Available options: Disabled (Default), Enabled

    – Added support for processor-internal Thermal Monitor 2
    Thermal Monitor 2 can be controlled with this setup item:
    Setup [F2]: Advanced -> Processor Configuration -> Processor Power and Thermal Management -> Thermal Monitor TM2
    Available options: Disabled, Enabled (Default)

    – Added support for feature bi-directional Processor-Hot
    Processor-Hot feature can be controlled with this setup item:
    Setup [F2]: Advanced -> Processor Configuration -> Processor Power and Thermal Management -> Bi-directional ProcHot
    Available options: Disabled, Enabled (Default)

    – Removed Setup nodes for ACPI thermalzone, cause DTS for ACPI is not supported

    ========================================================================================

    2013-02-28: BIOS release, Build #090 production

    – Added support for Super-IO (SIO) SMSC SCH3114 on EKF Expansion boards
    Setup [F2]: Advanced -> Super-IO Configuration -> Serial Port [A-D]
    Every COM port can be set to Enabled/Disabled. Additionally one of six IO base
    addresses and one of five IRQs can be selected for every port. If no SIO is
    detected, all COM ports are automatically disabled to not confuse an OS.

    – Show an error message if MAC address of EG20T is not programmed

    – GPIO direction register of EG20T is now set after output register is set,
    to prevent a short pulse on some GPIOs

    – Show board manufacturer in BIOS Setup
    Setup [F2]: Main -> System Information – Board Manufacturer

    – Show board type and revision in BIOS Setup
    Setup [F2]: Main -> System Information – Board Type

    – Show memory size of rank 0 and rank 1 in BIOS Setup
    Setup [F2]: Main -> System Information – Memory Channel Rank 0/1

    – Changed ACPI ID to “EKF” and ACPI table ID to “PC2LIMBO” (without dash)

    – Show correct SATA controller in UEFI shell command ‘drivers’

    – Increased number of history screens for UEFI shell from 3 to 20

    – Switched off red blinking LED GP immediately after Reset

    – Fixed a bug in USB OHCI driver which sometimes prevented a boot from an USB device

    ========================================================================================

    2013-01-15: BIOS release, Build #088 production

    – Changed Ethernet LED behaviour of EG20T Ethernet controller (top RJ45)
    Top LED signals this: No Link = LED is off, 1Gb Link = LED is constant Orange,
    100Mb Link = LED is constant Green
    Bottom LED signals this: No Link = LED Off, Activity = LED blinks Green with a blink
    rate of around 1.5Hz
    Two error cases can now be observed:
    Case 1: In case of no Ethernet Phy is detected, bottom LED is off and top Orange LED
    blinks with a rate of around 6Hz.
    Case 2: If unexpected OUI is read from Marvell Phy (88E1119R), bottom LED is off and
    top Orange LED blinks with a rate of 12Hz.

    – Show an error message if no Ethernet Phy at EG20T is detected

    – Show an error message if detected Ethernet Phy is not of type Marvell 88E1116R

    – Added a further option in Setup item “Select Mode on POST Error”
    Setup [F2]: Advanced -> Boot Configuration -> Select Mode on POST Error:
    Available options: Default, i.e. use error specific behaviour (Setup Default),
    Press F1 or F2 key, Delay and continue, Continue immediately without delay

    ========================================================================================

    2013-01-08: BIOS release, Build #086 production

    – Added Setup item which controls the behaviour of POST if an error occured during POST
    Setup [F2]: Advanced -> Boot Configuration -> Select Mode on POST Error:
    Available options: Press Key to continue (Default), 3s or no Delay before continue

    – Changed Default boot mode to Legacy
    Setup [F2]: Advanced -> Boot Configuration -> Select Mode on POST Error:

    – Changed RTC default date to 2013-01-01

    – Disabled ATA Configuration menu and removed JMB36x nodes from boot menu temporarily

    – Disabled Setup nodes for Console Redirection

    – Removed a minor bug in PCI initialization (SERR generation)

    – Updated progspi.exe to V3.2

    ========================================================================================

    2012-09-07: BIOS release, Build #082 production

    – Added boot support for SD Cards

    – More information in help screen of menu “PCI Express Configuration”

    – Now only one IRQ (IRQ 10) for all PCI devices in interrupt routing table

    ========================================================================================

    2012-08-03: BIOS release, Build #080 production

    – Switched off red blinking LED GP much faster after Reset

    – Added support to boot from devices attached to on-board SATA controller JMB362
    Option ROM for JMB362 must be enabled to boot from a SATA device:
    Setup [F2]: Advanced -> ATA Configuration -> Expansion ROM for JMB362
    JMB362-1 SATA 1 is routed to CompactPCI_PlusIO_1_SATA or HSE-2
    JMB362-1 SATA 2 is routed to CompactPCI_PlusIO_2_SATA or HSE-3
    JMB362-2 SATA 1 is routed to CompactPCI_PlusIO_4_SATA
    JMB362-2 SATA 2 is routed to CompactPCI_PlusIO_3_SATA
    Note: PCI Express Port 3 must be enabled to enable on-board JMB362 SATA controller

    – PCI Express Port 3 now enabled by default

    – Show board name and BIOS information (Build number, type and date) during POST
    Added EKF “Copyright” message

    – Additionally show vendor data behind model name for Intel SATA devices

    – Replaced Chipset Microcode with version C0_22111_DQ24_ADDRCTR24_CLK24.bin

    – Added support to reset BIOS Setup data, aka “CMOS” reset
    To set BIOS Setup data to default values, set jumper P-GP on PC2-LIMBO and restart
    the board. If jumper P-GP is constantly set, BIOS starts always with default settings.

    – Show CPU Microcode Version in BIOS Setup
    Setup [F2]: Advanced -> Processor Configuration -> CPU Microcode Version

    – Show Chipset Microcode (CMC) Version in BIOS Setup
    Setup [F2]: Advanced -> Processor Configuration -> Chipset Microcode (CMC) Version

    – Show Memory Reference Code (MRC) Version in BIOS Setup
    Setup [F2]: Advanced -> Processor Configuration -> MRC Version

    – Removed all IGD boot types from BIOS Setup, currently only VBIOS Default is available

    – Removed all LCD Panel types from BIOS Setup, currently only VBIOS Default is available

    – Removed S3 and S4 support from ACPI

    ========================================================================================

    2012-04-27: BIOS release, Build #072 production

    – Fixed a bug which prevents the usage of CompactPCI boards with on-board PCI Express
    bridges and which needs support for PCIe feature IOV (PCIe I/O Virtualization).
    These boards are among others on EKF CL1-COMBO, EKF CP5-GLAM and EKF CN7-REVERB.

    – Added EKF identifier block in BIOS binary to support flash utility progspi.exe

    – Updated progspi.exe to V3.0

    ========================================================================================

    2012-03-02: First BIOS production release, Build #070 production

    ========================================================================================

    < End of File >

Expansion Modules

Low Profile Mezzanine Modules
Side Boards +4HP Pitch
Rear I/O Transition Module

Specifications

  • CompactPCI® System Slot Controller
  • CompactPCI® PlusIO Rear I/O According to PICMG® 2.30
  • Hybrid Systems Option (Dual Backplane CompactPCI® and CompactPCI® Serial)
  • Based on the Intel® Queens Bay Platform (Tunnel Creek CPU, Topcliff PCH)
  • Intel® Atom™ Series E6xx Mobile Processor, Power Optimized CPU, Integrated Graphics Engine
  • E620(T) Processor 0.6GHz 3.3W TDP (T = -40°C to +85°C)
  • E640(T) Processor 1.0GHz 3.6W TDP (T = -40°C to +85°C)
  • E660(T) Processor 1.3GHz 3.6W TDP (T = -40°C to +85°C)
  • E680(T) Processor 1.6GHz 4.5W TDP (T = -40°C to +85°C)
  • DDR2 Soldered Memory up to 2GB
  • Integrated Graphics Controller (Front Panel: DVI or VGA Connector Option)
  • Max Resolution 1920×1080
  • Intel® EG20T (Topcliff) Platform Controller Hub (PCH)
  • Dual Gigabit Ethernet Controllers (Individually BIOS Controlled either F/P or J2 RIO)
  • Two Native SATA Channels 3Gbps
  • Four Additional SATA Channels 3Gbps, Mezzanine Usage (Option on Request) and/or Rear I/O (JMicron Controllers, no BIOS Boot Support as of Current)
  • Twelve USB 2.0 Channels
  • CFast™ Card Host Connector on-Board (SATA 3Gbps I/F)
  • microSD Host Connector (up to 32GB Class 6 Speed microSDHC Card Support)
  • SATA 1.8-Inch Solid State Drive (SSD) up to 800GB with C42-SATA Mezzanine Module Option (4HP Assembly Height Maintained)
  • CompactFlash and/or USB SSD with C40-SCFA Mezzanine Module Option (4HP Maintained)
  • Secondary CFast™ Card Host Connector with C41-CFAST Mezzanine Module Option (4HP Maintained)
  • On-Board PCI Express® Packet Switch (4 Lanes available for Rear I/O and CPCI Serial Backplane Respectively, another 1 Lane for Mezzanine Side Card)
  • Legacy I/O Expansion Connectors (CAN2.0B, HD Audio, LPC, PS/2, UART)
  • High Speed I/O Expansion Connectors (LVDS, PCI Express®, SATA, USB)
  • Variety of Mezzanine Expansion Boards (Side Cards) Available with and w/o PCIe
  • Most Mezzanines Optionally Equipped with 2.5-Inch Single- or Dual-Drive
  • Rear I/O Transition Module Option (e.g. PR1-RIO)
  • +5V Only Design, on-Board 3.3V Regulator Can Supply CPCI Peripheral Slot Cards
  • UEFI Phoenix BIOS with ACPI
  • Long Term Availability
  • Coating, Sealing, Underfilling on Request
  • RoHS compliant

Simplified Block Diagram

PC2-LIMBO BLOCKDIAGRAM
Contact Us