DN1-PIKE
XMC Mezzanine Module • Quad-Port Gigabit Ethernet Controller
The DN1-PIKE is a is a XMC standard single-width mezzanine card, equipped with four individual 1000Mbps Ethernet controllers. All ports are available via low profile RJ45 front bezel jacks. The Intel® I211 (option I210-IT) Ethernet NICs provide latest networking technology, e.g. power management for increased efficiency and Audio-Video Bridging (AVB) for tightly controlled media stream synchronisation, buffering, and reservation. The on-board PCI Express® packet switch is a flexible interface between one to four PCI Express® lanes, derived from the XMC connector P15 (upstream link), and the GbE NICs (single lane downstream links). The optimum performance can be achieved with a PCIe x 4 link established to the XMC carrier.
Intel® I211/I210 networking drivers are available for all major operating systems.
Downloads & Ressources
Ordering Information
| DN1-2-PIKE |
|
| DN1-3-PIKE |
|
Specifications
- Form factor XMC single-width mezzanine card 139mm x 74mm
- Stack height 10mm XMC to host (module PCB to carrier card PCB)
- Host I/F Connector P15 XMC (black housing)
- Option P15 connector according to XMC 2.0 (white housing)
- PCI Express® Gen1/Gen2 PCIe x 4 (PCIe x 2, PCIe x 1 fall-back)
- +3.3V operated by default (VPWR as stuffing option)
- Power consumption +3.3V 1.3A typ., 1.5A max.
- Four independent Gigabit Ethernet controllers (4 x MAC address) Intel® I211
- Option Intel® I210IT
- Integrated PHYs 1000BASE-T, 100BASE-TX, 10BASE-T (IEEE 802.3, 802.3u, 802.3ab)
- IEEE 802.3ab Auto Negotiation for automatic link configuration
- Auto MDI, MDI-X Crossover at all speeds
- Full duplex operation at 10/100/1000Mbps
- 9.5KB Jumbo Frame support
- Hardware-based time stamping (IEEE 1588) and support for 802.1AS – Precise Timing Protocol
- Support for Energy Efficient Ethernet (EEE) standard of IEEE 802.3az
- Option IEEE 802.1Qav compliant Audio-Video Bridging (AVB)
- IPv4, IPv6, TCP/UDP checksum offloads
- Driver support for all major operating systems
- 4 x front bezel connectors RJ45, 4 x LEDs link/activity
Simplified Block Diagram
