General
- 8-Port 1000BASE-T Ethernet switch, basically self-managed operation
- GL200 Version – non PoE
- GL220 Version – PoE+
- Intended for rugged industrial applications, ready-for-use (Embedded Go®)
- Industrial PCB Assembly
- PCB Dimensions 133.0mm x 78.0mm
- 8 x RJ45 Gigabit Ethernet connectors
- GL220 Version 802.3at PoE+ (up to 30W/port)
- Terminal block power connector
- Wide DC power input operation 9-57V (GL200)
- Nominal DC power input 48V/54V as required for PoE+ (GL220)
- Option scalable 16/24 GbE ports (stacked construction up to three GL200/GL220 PCBs)
- Option CPU mezzanine board GC370 stacked (for AVB/TSN protocol software) – GL210/GL230
I/O Connectors
- RJ45 Ethernet connectors, with integrated magnetics
- 1000BASE-T, 100BASE-TX, 10BASE-T compliant data transfer rate
- Terminal Block 3.5mm pitch 4-position screw lock power input
Gigabit Ethernet Switches
- Marvell® 88E6390 based Gigabit Ethernet switch
- PCBs can be stacked for 16/24 ports (option)
- Switches connected via 2.5Gbps SERDES (mezzanine stacking connectors)
- Integrated GbE MAC/PHY 1000BASE-T
- RJ45 Connectors w. integrated magnetics
- High performance, non-blocking, Gigabit Ethernet
- Support for up to 16K MAC addresses, 10KByte Jumbo Frames
- Supports 802.1 Audio Video Bridging (AVB) Gen 2 *
- Time Sensitive Networking (TSN) Standards *, IEEE 1588v2 one-step PTP
- Synchronous Ethernet *
- Quality of Service (QoS) support with 8 traffic classes
- Supports 4096 802.1Q VLANs, three levels of 802.1Q security
- Unmanaged solution (managed solution with additional mezzanine CPU card GC370)
- Up to two mezzanine stacking connectors for communication to adjacent switch PCB or CPU (option)
- Option GC370 management CPU ARM® v8 mezzanine card (GL210 – GL230)
- Stacked switch PCBs are virtually combined into a single switch with aggregated performance
Power over Ethernet
- PSE PoE+ according to IEEE 802.at
- Maximum power delivered per port 30W
- Maximum power delivered in total 120W
- IEEE 802.at PSE Type 2 mode A (power over RJ45 pins 1/2 & 3/6, 600mA)
- GL220 (unmanaged) or GL230 (with GC370 mezzanine CPU)
Power Requirements
- DC Input, 9-57V (12VDC, 24VDC, 48VDC) – GL200
- DC Input, 48VDC, 54VDC – GL220
- Rated power consumption 3W (GL200)
- Rated power consumption up to 125W (GL220 @ 120W external load via PoE+)
- Fast acting chip fuse
- Protected against reverse polarity
- TVS ESD Protection
- Common mode input filter
- 4-Position terminal block power connector, 3.50mm pitch, screw lock removable cable plug
Applications
- For easy system integration
- Industrial networks – IIoT – TSN/AVB *
- Transportation vehicles
- Construction and harvesting machinery
- Railway
- Rugged environments
- Customized connector loading
- Customized board design
Environmental & Regulatory
- Designed & manufactured in Germany
- Certified quality management according to ISO 9001
- Long term availability
- Rugged solution
- Conformal coating, sealing, underfilling on request
- RoHS compliant
- Operating temperature -40°C to +85°C (industrial temperature range)
- Storage temperature -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% … 95% RH non condensing
- Altitude -300m … +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- EC Regulatory EN55024, EN55032, EN62368-1
- MTBF tbd years