SB1-OBOE
CompactPCI® Serial Quad Port USB 3.0 & eSATA Combo Connectors
The SB1-OBOE is a peripheral slot board for PICMG® CompactPCI® Serial systems, equipped with four USB3/eSATA front panel combo connectors. The card is comprised of an USB 3.0 SuperSpeed controller, and a SATA III RAID controller. Hence each front panel connector is suitable for attachment of either USB 3.0, USB 2.0 or eSATA based peripheral devices. The SB1-OBOE is provided with a PCI Express® 2.0 package switch, and can be installed into any peripheral slot of a CompactPCI® Serial backplane. A single PCIe lane would be sufficient for operation, but the optimum performance will be achieved when the SB1-OBOE is inserted into a CompactPCI® Serial fat pipe slot.
Downloads & Ressources
Documents
Application Notes
General Information
Ordering Information
SB1-0100-OBOE |
|
Specifications
- PICMG® CompactPCI® Serial Standard (CPCI-S.0) Peripheral Slot Card
- Single Size Eurocard 3U 4HP 100x160mm2
- CPCI-S Backplane Connector P1
- Triple port PCI Express® Gen2 package switch
- Upstream port: 4 x PCI Express® lanes Gen1 (2.5Gbps) or Gen2 (5.0Gbps) supported
- Texas Instruments PCI Express® to quad-port USB 3.0 controller
- PCI Express® x 1 Gen2 interface for optimum performance
- USB 3.0 xHCI (eXtensible host controller interface) SuperSpeed
- USB 2.0 high-speed, full-speed, low-speed supported
- VBUS (+5V) 1.5A high current for each port eliminates need for external power supplies
- Four front bezel USB 3.0 type A combo receptacles for attachment of external USB devices
- Marvell® PCI Express® 2.0 to SATA III host controller
- PCI Express® x 2 Gen2 interface for optimum performance)
- Four SATA 6Gbps interface ports (backward support 3Gbps and 1.5Gbps)
- Native Command Queuing
- Hardware RAID 0/1/10
- On-the-fly AES encryption 128/256-bit
- AHCI driver support, Marvell® Storage Management (Windows® & Linux)
- Four front bezel eSATA combo connectors for attachment of external eSATA devices
- +5V 1.5A eSATAp (power over eSATA) with suitable cable harness (USB VBUS)
- Rugged Solution (Coating/Sealing Available on Request)
- Long term availability
- RoHS compliant 2002/95/EC
- Operating temperature: 0°C to +65°C (industrial temperature range on request)
- Storage temperature: -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% … 95% RH non condensing
- Altitude -300m … +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF tbd
Simplified Block Diagram