SD8-STEEL
CompactPCI® Serial SATA Drive Carrier Board (2.5-Inch or 1.8-Inch)
The SD8-STEEL is a peripheral slot card for CompactPCI® Serial systems. The SD8-STEEL is provided with a mobile rack, which accommodates a 2.5-inch size SATA drive, either SSD or HDD. Fast swap of the drive can be accomplished via the front panel. A push button opens a door and ejects the drive. The SATA channel is derived from the CompactPCI® Serial backplane connector P1. For optimum signal integrity, the SD8-STEEL is equipped with 6Gbps SATA redrivers. As an alternate, the SD8-STEEL is also available as a carrier for a fixed 2.5-inch drive (half-slim SSD card option), mounted directly to the PCB
Downloads & Ressources
SD8-STEEL
General Information
Ordering Information
| SD8-0100-STEEL |
|
| SD8-0900-STEEL |
|
Specifications
Feature Summary
- PICMG® CompactPCI® Serial Standard (CPCI-S.0)
- Peripheral Slot Card (up to 8 SATA Channels Specified on a CPCI-S Backplane)
- Mobile Rack Accommodates 2.5-Inch SATA Drive
- Suitable for HDD/SSD drive with typical dimensions 70mm x 100mm x 9.5mm
- Fast Swap via Front Panel Door Slot
- Patented NSS connector – change rate up to 50.000 mating cycles
- Option Carrier Board for a PCB Mount 2.5-Inch SATA Drive
- Option Carrier Board for a PCB Mount 2.5-Inch SATA Half-Slim SSD
- Suitable for CompactPCI® Serial System Slot Controller SC3-LARGO (CPU Board)
- Suitable for CompactPCI® PlusIO System Slot Controller PC3-ALLEGRO (CPU Board)
- CompactPCI® Serial Backplanes Available (Hybrid or Native)
- Rugged Solution (Coating/Sealing Available on Request)
- Long Term Available
- RoHS compliant
Simplified Block Diagram
