SE2-MOOD

CompactPCI® Serial • Dual M.2 PCIe x4 (NVMe) SSD Module Carrier Board

The SE2-MOOD is a peripheral slot card for CompactPCI® Serial systems, equipped with three M.2 sockets for SSD (Solid-State Drive) modules.
Two of the M.2 sockets are suitable for NVMe type SSD modules, with a PCIe x4 Gen3 interface for superior data transfer rates. When used as main mass storage devices in a system, the NVMe SSDs can speed up the overall system performance dramatically. The third (optional) M.2 connector can accommodate a classic AHCI SATA style SSD, used e.g. as backup drive or legacy systems boot device. With respect to the NVMe sockets, the SE2-MOOD is suitable for all NGFF SSD module sizes defined by the M.2 specification up to the 22110 form factor (SATA socket max. 2280). In order to avoid mix-up, the M.2 sockets are mechanically coded. The NVMe module sockets are provided with an M-key, and the SATA module connector features a B-key, according to the PCI Express® M.2 Specification (PCI-SIG).
For optimum NVMe SSD module performance, a PCI Express® x8 enabled backplane slot would be required (CompactPCI® Serial fat pipe slot). In addition, SATA backplane support is needed for the SATA SSD module.

Downloads & Ressources

General Information

Ordering Information

SE2-0100-MOOD
  • Carrier card for PCIe x 4 M.2 SSD modules (NVMe)
  • 2 x M.2 socket, PCIe Gen3 packet switch 8+4+4 lanes additional M.2 SATA socket Suitable for M.2 S1-S5 / D1-D5

Specifications

  • PICMG® CompactPCI® Serial standard (CPCI-S.0)
  • Single size Eurocard 3U 4HP 100x160mm2
  • Suitable for CompactPCI® Serial peripheral slot (PCI Express® & SATA enabled)
  • CompactPCI® Serial fat pipe slot PCIe x8 or at least peripheral slot PCIe x4 recommended
  • CompactPCI® Serial backplane connectors P1 & P2 for PCI Express® x8 and SATA

Simplified Block Diagram

SE2-MOOD BLOCKDIAGRAM
Contact Us