SLA-SOLO
Front I/O 5 x 100BASE-T1 • 1 x 1000BASE-T • Automotive Ethernet • Industrial Ethernet
100BASE-T1 Single Pair Ethernet is a popular automotive standard specified by IEEE 802.3bw and was formerly known as BroadR-Reach®.
The SLA-SOLO is a SPE switch card for CompactPCI® Serial systems. The front panel is provided with 5 x 100BASE-T1 transformer isolated industrial receptacles according to IEC 63171-6, and a 1000BASE-T compliant RJ45 jack. In addition, another Gigabit Ethernet port is wired to the CompactPCI® Serial connector P6 for backplane switching. For system control, the switch is connected to the CompactPCI® Serial connector P1 via PCIe®. The SLA-SOLO is equipped with the Marvell® 88Q5072 Automotive Ethernet switch, which provides a 20Gbps switching engine and a high-performance ARM® Cortex® M7 CPU. The integrated 100BASE-T1 PHYs are fully inter-operable w. Open Alliance BroadR-Reach® (OABR) PHYs. Basically the switch can be used as self-managed.
As an option, the SLA-SOLO can be provided with a mezzanine connector for attachment of a low profile networking CPU card (SLC-ARMADA), for addition of management software and AVB/TSN protocols, or even custom specific code.
Downloads & Ressources
Documents
General Information
Specifications
- 100BASE-T1 IEEE 802.3bw Ethernet switch
- PICMG® CompactPCI® Serial (CPCI-S.0) peripheral card
- Single Size Eurocard 3U 4HP 100x160mm2
- 5 x T1 industrial jacks IP20 according to IEC 63171-6
- 1 x RJ45 1000BASE-T Gigabit Ethernet connector
- CompactPCI® Serial backplane connectors P1, P6
- Backplane 1000BASE-T Ethernet & PCIe® x1 Gen3
- Intended for industrial and automotive use
- Self-managed operation
- Management software option *
- AVB/TSN protocol stack option *
* requires SLC-ARMADA low profile CPU mezzanine module
Simplified Block Diagram
