SU8-HUM

CompactPCI® Serial • Dual-Port Isolated RS-485 Interface

  • SU8-HUM

The SU8-HUM is a dual-port isolated RS-485 Interface for PICMG® CompactPCI® Serial systems. It is an assembly unit, comprised of the SK2-SESSION XMC module carrier card, and the DU1-MUSTANG RS-485 XMC mezzanine module. Both D-Sub front panel connectors are isolated against the board circuitry and withstand up to 250VAC. The 16Mbps EIA/TIA-485 transceivers can be configured for full- or half-duplex operation, either point-to-point or multipoint applications.

Downloads & Ressources

General Information

Drivers

Expansion Modules

Assembly Elements

Specifications

  • PICMG® CompactPCI® Serial standard (CPCI-S.0) peripheral slot Card
  • Assembly unit comprising carrier board SK2-SESSION & XMC Module DU1-MUSTANG
  • Single size Eurocard 3U 4HP 100x160mm2
  • CPCI-S backplane connector P1
  • XMC Module carrier board, equipped with XMC connector J15
  • PCI Express® Gen1 (2.5Gbps) or Gen2 (5.0Gbps) supported
  • Bidirectional PCIe redriver/repeater for optimum signal integrity
  • PCI Express® clock buffer for optimum signal integrity
  • XMC Module single-width mezzanine card 139mm x 74mm, stack height 10mm
  • Equipped with dual-port UART
  • PLX Oxford 950 UART w. 128-byte transmit/receive FIFO
  • Asynchronous baud rates up to 15Mbps
  • Windows® & Linux device driver support
  • 5kV rms isolation barrier RS-485/RS-422 transceivers (Analog Devices)
  • Configurable as half- or full-duplex
  • ±15 kV ESD protection on RS-485 input/output pins
  • Data rate 16 Mbps
  • Connect up to 256 nodes on one bus (driver enable control via DTR)
  • Open- and short-circuit, fail-safe receiver inputs
  • High common-mode transient immunity >25 kV/µs
  • Thermal shutdown protection
  • Two front bezel male 9-pin D-Sub connectors
  • RS-485 ports isolated against each other and board circuitry 250VAC
  • On-board DIP-switches for full/half-duplex setting, and line termination on/off
  • Suitable e.g. for CompactPCI® Serial System Slot Controller SC1-ALLEGRO (CPU Board)
  • Suitable e.g. for CompactPCI® PlusIO System Slot Controller PC1-GROOVE (CPU Board)
  • Commercial and industrial temperature range
  • Rugged solution (coating/sealing available on request)
  • Long term availability
  • RoHS compliant
Contact Us