EKF - Short Profile
EKF - Short Profile
SN4-DJEMBE

CompactPCI® Serial Peripheral Board

Quad 10GBASE-T Networking Controllers • M12-X Connectors



SN4-DJEMBE

Description

Ordering Information

Product Information

Block Diagram

General Information
Products One Click

All You Need to Know

Drivers

Ethernet



Photo Gallery


© EKF • Images show up in a secondary browser tab or window


SN4-DJEMBE

Quad-Port 10GBASE-T Networking Controllers
M12-X Ethernet Front Panel Connectors


The SN4-DJEMBE is a networking adapter card for CompactPCI® Serial systems, equipped with four individual controllers for 10GBASE-T. The front panel is provided with M12-X style Ethernet connectors Cat 6a, as required for railway and many other applications.

The 6-speed mGig controllers with integrated PHYs are designed to support also other network rates 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX and 10BASE-Te, compliant with the IEEE® 802.3an/bz standard and the NBASE-T™ specification.


The board is equipped with a PCIe® Gen3 packet switch (8 lanes upstream to the backplane connectors). For optimum performance when operated at maximum speed across all ports simultaneously, the SN4-DJEMBE should be positioned in a CompactPCI® Serial backplane fat pipe peripheral slot, PCIe® Gen3 x8.

The single-chip high performance Ethernet controllers Marvell® AQC113 provide latest networking technologies. Drivers are available for Windows 10/11 and Linux.



SN4-DJEMBE • Photo Soon Here

Feature Summary

  General
  • Peripheral board for PICMG® CompactPCI® Serial (CPCI-S.0) systems
  • Form factor single size Eurocard (board dimensions 100x160mm2)
  • Mounting height 3U
  • Front panel width 4HP
  • Provides 10Gbps Ethernet front panel I/O (4 x M12-X)
  • CompactPCI® Serial fat pipe slot PCIe® Gen3 x8 recommended

  M12-X Front Panel Connectors
  • 8-Pos. X-coded R/A M12 Ethernet receptacles
  • Cat. 6A Data transmission rate 10Gbps
  • 10GBASE-T Ethernet signal transformers
  • M12-X Ethernet cables & connectors available from many manufacturers
  • Adapter cables available M12-X to RJ45

  Networking Interface Controllers (NIC) Key Features
  • 4 x Marvell® AQC113 10G mGig
  • Single-chip MAC/PHY
  • 6-Speed 10G/5G/2.5G/1G/100M/10M
  • Integrated Marvell Alaska PHY featuring NBASE-T technology
  • Delivers 10 GbE network connectivity speed through Cat 6a cable
  • Delivers 5 GbE and 2.5 GbE network connectivity speeds through 100 meters of Cat 5e or better cabling
  • Energy Efficient Ethernet (EEE) support
  • Advanced cable diagnostics
  • Audio Video Bridging (AVB) and PTP/1588v2
  • LSO, RSS, DCA and header checksum
  • Quality of Service (QoS) support
  • Jumbo Frames (up to 16 Kbytes)
  • IPv4/v6, IPv6/TCP, and IPv6/UDP checksum offload
  • Internet Control Message Protocol (ICMP)
  • Address Resolution Protocol (ARP)
  • Multicast Domain Name System (mDNS)
  • Transmission Control Protocol (TCP) Keepalives (KA)
  • PCIe® interface Gen3 x2
  • Drivers: Windows 10 and Windows 11 (64-bit), Linux 3.10 and higher

  Applications
  • Railway, transportation
  • Industrial IoT
  • Gateway edge to server
  • Custom specific modifications and alternate design available on request

  Regulatory & Environmental
  • Designed & manufactured in Germany
  • ISO 9001 certified quality management
  • Custom specific development on request
  • Long term availability
  • Coating, sealing, underfilling on request
  • RoHS compliant
  • Operating temperature -40°C to +85°C (industrial temperature range)
  • Storage temperature: -40°C to +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • EC Regulatory EN55035, EN55032, EN62368-1
  • MTBF tbd years (MIL-HDBK-217F, SN29500 @+40°C)

SN4-DJEMBE • Simplified Block Diagram

SN4-DJEMBE • Simplified Block Diagram
Ordering Information
Please refer to List 21 for popular SKUs