C20-SATA
SATA Dual-Drive • Mezzanine Module
Available as a mezzanine add-on storage module to several CPCI side boards, the purpose of the C20-SATA is to accommodate one or two 2.5-inch SATA drive(s), either SSD (Solid State Drive) or HDD (Hard Disk Drive).
With respect to the dual drive solution, either RAID or non-RAID drivers are available. Since only a few components are required on the C20-SATA PCB, it is a moderate cost system storage solution. The C20-SATA mounts on top of the carrier board. Provided with a single (top mount) drive, the 4HP profile of the associated carrier board would be maintained, resulting in a 8HP total assembly, comprised of the CompactPCI® base board, the expansion carrier card (aka side board), and the C20-SATA storage module.
Downloads & Ressources
Documents
Specifications
Proprietary size mezzanine module, basically fits into the 4HP (20.32mm) envelope of the
carrier board, typically delivered as a ready to use assembly unit comprising of carrier board,
CPU base board, drive(s), mounting position right (on top of carrier board)
Simplified Block Diagram