SBF-CROSSOVER

CompactPCI® Serial • Quad Port USB 3.0 • Dual GbE • Option 8HP Front Panel w. RS-232 or CAN FD

The SBF-CROSSOVER is a peripheral slot card for CompactPCI® Serial systems, equipped with four individual USB 3.0 compliant controllers, and two Gigabit Ethernet NICs, all wired for front I/O. In addition, a PCI Express® Mini Card socket is provided on-board, which can be used e.g. for a fieldbus I/O module such as CAN FD. Furthermore, a quad port UART is available for RS-232 or RS-485 communication. The SBF-CROSSOVER can be installed into any PCI Express® enabled peripheral slot of a CompactPCI® Serial backplane (PCIe® x4 or fat pipe slot recommended for optimum performance). All on-board devices are PCI Express® based. The front panel USB and Ethernet jacks are wired to individual controllers each, thus achieving the full data throughput on all connectors concurrently.

Downloads & Ressources

Documents

Drivers

Intel® Driver & Support Assistant

Ordering Information

SBF-0100-CROSSOVER	4 x USB 3.0 controller, 2 x GbE NIC, 4HP front panel (2 x GbE RJ45, 4 x USB 3.0 Type-A) internal USB port no SIM, no support SU*
SBF-0200-CROSSOVER	4 x USB 3.0 controller, 2 x GbE NIC, quad UART, PCIe Mini Card socket (e.g. for CAN FD module) 8HP front panel (2 x GbE RJ45, 4 x USB 3.0 Type-A) SIM, support SU*

Specifications

General

PICMG® CompactPCI® Serial standard (CPCI-S.0) peripheral slot card
Single Size Eurocard 3U 4HP 100x160mm²
Option 8HP front panel width
CPCI-S backplane connector P1
PCIe x 4 upstream – Gen2 (5GT/s) required for optimum performance

PCI Express® Interface

USB Interfaces

4 x Texas Instruments PCI Express® dual port USB 3.0 controller TUSB7320
USB 3.1 Gen1 (formerly USB 3.0) xHCI (eXtensible host controller interface) SuperSpeed supported
USB 2.0 high-speed, full-speed, low-speed supported
4 x front panel Type A USB 3.0 host connectors
V_BUS (+5V) 1.5A high current power switches assigned to front panel connectors
Option on-board Type-A connector, suitable for on-board USB stick
USB 2.0 wired to PCIe® Mini Card socket

Networking

Two networking interface controllers (NIC), 1000BASE-T, 100BASE-TX, 10BASE-T connections
Intel® I210-IT -40°C to +85°C operating temperature GbE controllers w. integrated PHY
IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensitive streams
IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
Two GbE ports via RJ45 front panel jacks (option 2 x M12-X connectors with mezzanine module P01)

UART

Diodes® (Pericom®) PCI Express® quad port UART PI7C9X7954
High performance 950-class UART
16C550 software compatible
128-Byte FIFO for each transmitter/receiver
Baud rate up to 15Mbps
XON/XOFF in-band flow control
CTS/RTS or DSR/DTR out-of-band control & driver enable signal for PartyLine operation
Data frame 5, 6, 7, 8 and 9 bits
Clock prescaling 4 to 46
Windows® WHQL device driver support
Two on-board RS-232 transceivers MAX3243, pin headers suitable for attachment of D-Sub 9-pin connectors by means of micro-ribbon flat cable
Two UART channels wired tor pin headers suitable for SU*-series modules (isolated RS-232 or isolated RS-485)
Custom specific F/P design for additional D-Sub or Micro-D connectors (8HP or wider)

PCI Express® Mini Card

PCI Express® Mini Card socket, full-size or half-size modules
Micro SIM card holder associated (15mm x 12mm ETSI TS 102 221 V9.0.0, Mini-UICC)
PCI Express® Mini Cards of both styles supported: USB and PCIe® based
Suitable for wireless applications
Suitable for fieldbus modules e.g. CAN-FD, and industrial Ethernet modules (real time networking)
Custom specific F/P design for additional pigtail SMB antenna connectors (8HP or wider)
Custom specific F/P design for non-radio applications e.g. CAN-FD (8HP or wider)

Applications

Environmental & Regulatory

Designed & manufactured in Germany
ISO 9001 certified quality management
Long term availability
Rugged solution (coating/sealing available on request)
RoHS compliant
Operating temperature: -40°C to +85°C (industrial temperature range)
Storage temperature: -40°C to +85°C, max. gradient 5°C/min
Humidity 5% … 95% RH non condensing
Altitude -300m … +3000m
Shock 15g 0.33ms, 6g 6ms
Vibration 1g 5-2000Hz
MTBF 24.6 years
EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)

Simplified Block Diagram

lifecycle

Product Lifecycle

Active Product
This product is available for purchase and actively supported.
NRFND
"Not Recommended for New Designs" – we suggest avoiding this product for new projects.
EOL
"End of Life" – this product is discontinued and no longer available.

SBF-CROSSOVER

CompactPCI® Serial • Quad Port USB 3.0 • Dual GbE • Option 8HP Front Panel w. RS-232 or CAN FD

EKF Elektronik GmbH

Products

Industries

EKF

EKF

Social Media